KW-A Series
One
Head Sewing Machine
MTO-3000
Series
FEATURES
Compensation Scaling : Enlarges or reduces the size of design vertically or horizontally.
Editing : Corrects erroneous design and enhances existing design without re-punching.
Floating (Test Run) : Moves the pantograph of design without actual sewing.
Direct return to origin : Moves back to origin with one key stroke.
AC servo motor and NC system : Precise control
Automatic lubrication : Sewing head and rotary hook
Preparation of semi-automatic service table
Memory backup : Saves machine memory in case of power failure and preserves
pattern memory when machine power is turned off.
14" Color CRT monitor : Graphically shows information on current status like stitch
numbers, coordinate values and etc.
Built-in 3.5" Floppy Disk Drive : Disk holds a lot of pattern designs.
Automatic detection of thread breakage: This is carried out faultlessly by photoelectric sensor.
SPECIFICATIONS
Control
type |
2
Axis simultaneous control. Linear/Arc Interpolation |
Motor |
AC
servo motor |
Type
of Stitch |
One
needle lock stitch |
Feeding
speed |
0 ~ 11m / min |
Bobbin |
Large
bobbin |
Needle |
DB
#18 ~ #23 |
Stitch
length |
1.0 ~ 6.0mm |
Power
supply |
AC
220V 3 phase 50/60Hz |
Power
consumption |
5.8
KW |
DIMENSIONS
Model |
Working
Area (mm) |
Dimensions
(mm) |
Width |
Length |
Height |
MTO-3000 |
2,300
x 2,600 |
5,560 |
3,670 |
1,300 |
STANDARD ACCESSORIES
Model |
Needle |
Needle
Guide |
Clip |
Clip
Frame |
Tools |
Design
|
MTO-3000 |
20
ea |
20
ea |
100ea |
2ea |
1set |
50 |
|